Translation missing: en.collections.general.sold_out

Audio-Technica - AT2040 Hypercardioid Dynamic Podcast Microphone With Audio-Technica ATH-M20x Closed-Back Monitoring Headphones (Duo Pack)

*This Bundel includes Two Audio-Technica AT2040 Hypercardioid Dynamic Podcast Mic & Two Audio-Technica ATH-M20x 

Meet Your New Podcast Mic

You’ve got the idea, you’ve got the audience, and now you need the mic. With the AT2040 from Audio-Technica, your dreams of crisp, clear podcast audio will finally come to fruition. Delivering maximum vocal isolation, the hypercardioid AT2040 provides natural sound while discarding extraneous noise from all sides of the mic. Podcasters at Sweetwater trust Audio-Technica products for their vocal tracking needs, and they have found the dynamic AT2040 microphone to ensure the production of precise audio that helps content creators connect with their audience.

Superior audio protection

The Audio-Technica AT2040 facilitates impressive isolated audio, but its hypercardioid dynamic design is only part of the equation. With a pivoting stand mount integrated with a shockmount, vibrations traveling through your boom, stand, and mount become nullified before they can reach your audio stream. Also, a multistage foam-mesh windscreen adds added protection given its internal pop filtering capabilities. Not to mention, the pivoting stand includes a thread adapter for 5/8-inch-27 to 3/8-inch-16.

Audio-Technica AT2040 Hypercardioid Dynamic Podcast Mic Features:

  • Dynamic design produces ultra-smooth, crisp, clear audio
  • Polar pattern: hypercardioid
  • Element: dynamic
  • Frequency response: 80–16,000Hz
  • Impedance: 600 ohms
  • Includes stand mount with shock mount and thread adapter for 5/8-inch-27 to 3/8-inch-16
  • Integral 3-pin XLR-M type output connector
  • Open circuit sensitivity: -53 dB (2.2 mV) (0 dB=1 V/Pa, 1kHz)
  • Soft protective pouch also included

SPECS

Primary Applications Studio Recording, Broadcast, Podcast
Form Factor Stand/Boom Mount
Intended Sound Sources Speech/Voice Over
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Dynamic
Polar Pattern Hypercardioid
Orientation End Address
Circuitry Solid-State
Pad None
High-Pass Filter None
Tone Adjustment None
Gain Adjustment None
Indicators None
On-Board Controls None
Windscreen Built-In
Performance
Frequency Range 80 Hz to 16 kHz
Impedance 600 Ohms
Sensitivity -53 dBV/Pa at 1 kHz
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
Headphone Connector None
Power
Bus Power None
Physical
Color Black
Mounting Mic Clip (Included)
Included Case Pouch
Included Filters None
Dimensions ø: 2.05 x L: 5.72" / ø: 5.21 x L: 14.53 cm
Weight 1.4 lb / 615 g

 

Audio-Technica ATH-M20x 

Bringing the acclaimed features of the M-Series headphones to a price point that's accessible for all, the black Audio-Technica ATH-M20x monitor headphones offer solid build quality and audio performance for musicians and content creators recording and mixing at home. Outfitted with 40mm dynamic drivers and an over-ear, closed-back design, the ATH-M20x headphones deliver enhanced bass response and wide bandwidth (15 Hz to 20 kHz) while isolating you from outside sounds.

Thanks to the 15° swiveling earcups, high-quality materials, and generous cushioning on the headband and earpads, the headphones are both durable and comfortable to wear. Exiting from the left earcup, the attached 9.8' cable reduces tangles and simplifies channel identification. The cable sports a 3.5mm mini plug for use with mobile devices and computer soundcards, and a 1/4" snap-on adapter is included for easy hookup to audio interfaces, mixers, and stereo receivers.

40mm Drivers

The ATH-M20x features 40mm dynamic drivers with rare earth (neodymium) magnets and CCAW (copper-clad aluminum wire) voice coils for quality sound reproduction at a competitive price point.

Tuned for Enhanced Bass Response

The drivers and headphone design work together to provide a sonic signature tuned for enhanced bass performance. With a frequency response of 15 Hz to 20 kHz, the ATH-M20x can reproduce a full spectrum of tones.

 

Key Features
  • For Home Recording and Mixing
  • 40mm Neodymium Dynamic Drivers
  • 15 Hz to 20 kHz Frequency Response
  • Tuned for Enhanced Bass Response
  • Over-Ear, Sound-Isolating Design
  • 15° Swiveling Earcups
  • Attached Single-Sided Cable
  • Solid Build Balances Strength & Comfort
  • 3.5mm TRS Plug and 1/4" Snap-On Adapter

Over-Ear, Sound-Isolating Design

The ATH-M20x utilizes a circumaural design that contours around the ears for excellent sound isolation in loud environments. This over-ear, closed-back style is optimal for reducing bleed and separating you from outside sounds.

15° Swiveling Earcups

Equipped with 15° swiveling earcups, the ATH-M20x ensures a great fit.

Attached Single-Sided Cable

Keeping it simple and clean, the ATH-M20x incorporates an attached 9.8' cable that exits from the left side. This increases convenience and makes it easier to distinguish the different sides of the headphone.

3.5mm Plug and 1/4" Snap-On Adapter

The attached cable is terminated with a straight 3.5mm TRS mini plug for easy hookup to mobile devices, MP3 players, and computer headphone jacks. A 1/4" snap-on adapter is included for compatibility connectivity with audio interfaces, mixers, and dedicated headphone amplifiers.

Solid Build Quality

Thanks to the high-quality materials used in the ATH-M20x, the headphones balance comfort and strength while delivering enhanced audio and effective isolation.

Notify me when this product is available:

Search our shop